Inspection Before Starting The Ordinary Lathe

1. Add appropriate lubricating grease according to the machine tool lubrication chart.
2. Check that all electrical facilities, handles, transmission parts, protection and limit devices are complete, reliable and flexible.
3. Each gear should be at zero position, and the belt tightness should meet the requirements.
4. Do not store metal objects directly on the bed surface to avoid damaging the bed surface.
5. The workpiece to be processed must be free of mud and sand to prevent mud and sand from falling into the carriage and wearing out the guide rails.
6. Before clamping the workpiece, an empty test run must be carried out. Only after confirming that everything is normal can the workpiece be loaded.