Gantry Machining Center Operating Procedures

1. The operator should be familiar with and master the performance and characteristics of the gantry machining center machine. Ensure that the emergency stop switch can function quickly and effectively when an emergency occurs to avoid injury accidents.
2. Wear labor protection equipment according to regulations, and it is strictly prohibited to wear gloves when operating.
3. When the equipment is working, do not touch the electronic switch with wet hands to avoid electric shock. Do not touch any moving parts with your hands.
4. Do not place tools or non-machined workpieces on the gantry machining center or on moving objects.
5. The computer desk or work table next to the machine must be sturdy and must not be placed on moving parts.
6. When loading and unloading the workpiece, stop the machine first and pay attention to maintaining an appropriate distance between the workpiece and the tool. When the machine is running, please do not open the front door and the left and right covers at will to avoid personal injury.
7. After the tool is set, please run it with DRY RUN first to make sure the program is correct.
8. When shutting down after a power outage or emergency stop, the three axes should be restored to their original mechanical position.
9. Do not dismantle the travel switch or any related parts of the protection switch without authorization.
10. Before leaving the machine after finishing work, the control power switch on the operation panel and the main switch of the electrical box should be turned off.