CNC milling machine preparation matters

1. Before operation, you must be familiar with the general performance, structure, transmission principle and control procedures of CNC milling machines, and master the functions and operating procedures of each operating button and indicator light. Do not operate and adjust the machine tool until you understand the entire operation process.
2. Before starting the machine tool, check whether the electrical control system of the machine tool is normal, whether the lubrication system is smooth and whether the oil quality is good, and add enough lubricating oil according to the regulations. Whether each operating handle is correct, and whether the workpiece, fixture and tool are firmly clamped. , check whether the coolant is sufficient, then idle at idle for 3 to 5 minutes, check whether each transmission component is normal, and only use it normally after confirming that there is no fault.
3. After the program debugging is completed, you must obtain the consent of the instructor before you can follow the steps. Skipping steps is not allowed. Those who operate without permission from the instructor or in violation of regulations will receive a zero score. Those who cause accidents will be punished in accordance with relevant regulations and compensated for corresponding losses.
4. Before processing parts, you must strictly check whether the machine tool origin and tool data are normal and perform simulation without cutting paths.